DC Power Supplies

Sort By:
Show
  • View as :

This Agilent 6675A with option J08 is capable of producing 22 amps of current with up to 100Vdc output at up to 2160 watts. It requires 220 Vac input single phase. It has been fully tested and works perfectly.

This Agilent 6675A is in fantastic condition. The only user of this equipment hardly ever used it. It is capable of producing 120 Vdc at 18 amps at a max power of 2000 watts. This is as close to new as you will ever get buying used.

This Agilent 6675A with option J07 is capable of producing 11 amps of current with an output voltage of up to 200Vdc at up to 2000 watts. It requires 220 Vac input single phase. It has been fully tested and works perfectly.

Out of stock

These E3632A DC power supplies are in excellent condition. LED segments are strong and display windows are scratch-free, They have been fully tested including GPIB and are guaranteed to pass NIST calibration. They produces 15V, 7A or 30V, 4A depending on the output range selected. Since we have many units, available they may be Agilent or HP branded.

Out of stock

This Agilent E3633A is in very good condition. It has been tested on both ranges of output for voltage and current output as well as readback accuracy. The GPIB has also been tested. It works perfect and looks very good cosmetically. Bright LED segments with a clean display window.

This is a rackmount Agilent E3643A unit that is fully tested and works exactly as the manufacturer intended.

Key Features & Specifications

  • Output ratings (@ 0°C to 40°C)
  • Range 1: 0 to 35 V /1.4 A
  • Range 2: 0 to 60 V / 0.8 A
  • Programming accuracy (@ 25°C ±5°C), ±(% output + offset)
  • Voltage: <0.05% + 10 mV (<0.1% + 25 mV for output 2 of E3646/47/48/49A)
  • Current: <0.2% + 10 mA
  • Ripple & noise 20 Hz to 20 MHz
  • Normal Mode Voltage: <8 mVpp / 1 mVrms
  • Normal Mode Current: <4 mArms
  • Common Mode Current: <1.5 uArms
  • Readback accuracy (@ 25°C ±5°C), ±(% output + offset)
  • Voltage: <0.05% + 5 mV (<0.1% + 25 mV for output 2 of E3646/47/48/49A)
  • Current: <0.15% + 5 mA (<0.15% + 10 mA for output 2 of E3646/47/48/49A)

Description

Agilent basic DC power supplies offer essential features for a tight budget. The single & dual output, 30-100 W GPIB E3640 series provide small, compact size for bench and system use; low output ripple and noise; and built-in measurements and basic programmable features. The Agilent 48W, single output E3643A is a stable and reliable power supply for benchtop and basic automated test applications, and enables versatile solutions for tests that require moderate speed and precision with both GPIB and RS232.

The Agilent HP 5060-3387 Relay output connector ( Option 760 ) is used with Hp 66101A, 66102A, 66103A, 66104A, 66105A,66106A DC Power modules. We have over 30 in stock as of 2/6/15. Agilent HP 5060-3387 Relay output connector ( Option 760 ) used with Hp 66101A, 66102A, 66103A, 66104A, 66105A,66106A DC Power modules. Due to extremely limited quantities available, these will only be sold in conjunction of the purchase of a mating power supply module.

This HP 6573A is a 35 Vdc 60 amp 2000 watt DC power supply is in very good condition. It has been fully tested and works beautifully. It comes with the input cover, output cover and all four feet.You see from the photos that the plastic window has a very very small scratch and there is what appears to be a slight melted plastic on the left side of the bezel where it appears it was bumped with a soldering iron perhaps. The unit is not new and has some normal wear but overall I would give it a 87% on a scale of a 100 for cosmetics. This series of HP supplies require 220VAC single phase input.

This HP66001A keyboard for use with HP 66000A mainframes has been tested and works fine. We have 2 in stock in the same condition. Some LED segments in the readout display are not as bright as when new. Retainer latches on connector to mainframe are missing, but connector stays securely in mainframe..

These HP 66101A Power modules are 100% functional. They have been tested at full load of 8 Volts at 16 amps. Units have been aligned. The modules are clean. You will be satisfied. Option 760 (5060-3387) available.

X