This unit is in good to very good condition. It has been fully tested and functions as expected and specified by the manufacturer. It has a FAIR display. It does not come with rackmount handles, they can be purchased for an additional $60.00.
Key Features & Specifications
Power: 1750 VA
Voltage rms: 300 V
Current rms: 13 A
Repetitive & non-repetitive peak current: 80 A
Output Frequency Range DC; 45 Hz to 1 kHz
Ripple & Noise (20 kHz to 10 MHz)
-60 dB (relative to full scale)
Line & Load Regulation
Line regulation (% of full scale): 0.1%
Load regulation (% of full scale): 0.5%
Rms. Voltage (35 – 100 Hz): 0.03% + 100mV
DC Voltage: 0.05% + 150 mV
Rms. Current (45 – 100 Hz)
o High Range: 0.05% + 10mA
o Low Range: 0.05% + 1.5mA
Power (VA) (45 – 100 Hz)
o High Range: 0.1% + 1.5VA + 12 mVA/V
o Low Range: 0.1% + 1.5VA + 1.2 mVA/V
This California Instruments 6000LS-3 with ADV, GPIB, HF, Mode, A350 & 704 was just repaired and factory calibrated by Ametek Programmable Power Inc., the manufacturer of the unit.
It is capable of producing 6000VA of power in 3 phase or single phase at your selection. it also has MODE option which allows switching between 3 and single pase output. in the standard configuration the output voltage ranges would be 0-135Vac (Low range) or 0-270Vac (High Range). Associated current output would be 44.4 amps or 22.2 amps in single phase output, respectively or 14.8 and 7.4 amps per phase in 3 phase mode.
The California Instruments 1251RP is an AC source that produces from 0 Vac rms to 270 Vac rms at up to 1250VA. These units have been NIST calibrated in September of 2013 and have a 2 year calibration cycle. Cosmetically they have scratches on the top covers but look good besides that. The manufacturers list price is $5470.00. Here is your opportunity to get a workhorse supply at a bargain price. We have only 2 in stock as of 9/12/2013.
This California Instruments 2001RP-OP1 is in great condition and guaranteed to pass NIST calibration. It has option OP1 so it has GPIB control.
The RP Series consists of two models, 2001RP and 2003RP. These units are ideal sources for general purpose AC power applications that require variable voltage and frequency at power levels up to 2000 VA. The 2001RP provides single phase output and the 2003RP provides three phase output. With simple knobs used to set voltage, frequency and current limit, the RP Series provides an inexpensive source of AC power in a small and lightweight package. All RP Series power source models can be used in table-top mode or rack-mounted.
500 VA, Single-phase Provides 0-300 VAC or 0-424 VDC output from a single source Delivers full power with up to 6:1 Crest Factor loads DC/15 Hz to 1 kHz Ultra-pure/low distortion output for designed for commercial applications Smaller, lighter and expanding setting and read-back functions Power amplifier mode Programmable voltage, current limit Optional GPIB and RS232 interface
This California Instruments 6000LS-3 with EHV, GPIB, & Mode was just repaired and factory calibrated by Ametek Programmable Power Inc., the manufacturer of the unit. We have 6 different 6000LS-3 units in stock. They come with the following options:
This California Instruments 2253IX AC DC Power Source Analyzer was just repaired and factory calibrated by Ametek Programmable Power Inc., the manufacturer of the unit. It is a 3 phase output unit. It produces 2250VA of output power. It can be used in low range with an output voltage of up to 150 Vac at up to 6.5 amps per phase or up to 300 Vac at up to 3.25 amps per phase of current with a maximum power rating of 2250VA or 750VA per channel in 3 phase operation. In DC mode of operation the unit can produce up to 1.63 Amps per phase at up to 400 Vdc or up to 3.25 amps per phase at up to 200 Vdc with a maximum power rating of 1500VA or 500 watts per output .
This California Instruments 4503L-3P-4245 is in excellent condition and guaranteed to function as it was designed by the manufacturer to do. It has a low range 0-135 Vac output and high range 0-270 Vac output. It is a 5000 VA unit capable of up to 37 Amps of AC current output or 12.3 Amps per phase. The input voltage is specified at 3 phase 187 Vac to 252 Vac at from 47 to 440 Hz.
The ContinuousWave (CW) Series of AC power sources provides clean single phase power at an impressive price/performance ratio. These compact switch mode sources come in two series, manual (CW 2501M) or programmable (CW 2501P) with standard IEEE-488.2 or RS-232 control. Both series have three power levels, 800 VA, 1250 VA and 2500 VA. The 800 and 1250 VA models are 2U (3.5″) high and allow the unit under test to be connected to the front or rear panel. The 2500 VA model is 3U (5.25″) high with rear panel output connections. All models can be operated in a benchtop or rackmount configuration.
This unit is in very good to excellent condition. It has been fully tested and as you can see from the various photos the unit works flawlessly. It does have one peculiarity. The front panel overlay is for that of a 5KVA unit which this is not. The unit is a 3001iX which is a 3KVA unit as identified by the part ID label on the rear of the unit. We are in the process of ordering the correct label now.
AC Power Source/Analyzer 750VA in great condition with the exception of a hairline crack on the plastic display window.
The 6800 series ac power source/analyzers are members of the Agilent Technologies “One-Box” Solution power products family. These products offer an integrated solution for ac power testing applications.
It provides up to to 300Vac from 45Hz to 1 Khz frequency output at up to 6.5 amps with a max VA output of 750VA.